Car lifts are one of the most commonly used equipment in auto repair shops. The car can be lifted to a certain height from the ground, so that the repairman can enter the bottom of the car, or perform tire disassembly and four-wheel positioning. The car lift brings great convenience to the repair work. In addition, the price is low and the use is simple. Therefore, it is as large as the 4S shop of the car, as small as the roadside repair booth, and even the oil shop and the car wash have the demand for the lift.

We all know that car lifts are special lifting equipment. We need to use them frequently in daily auto repair work. Then the auto repair masters are standing under a few big guys for car repair work! But we must pay attention to the safe use and daily maintenance of the car lift! Otherwise it is very easy to have a serious safety accident! Let me introduce to you the four major causes of terror that are prone to security incidents!

First, the foundation problem: Some auto repair masters are not clear about the foundation requirements of the lift, which causes the lift to be installed in the case of unqualified foundations! In this case, the lift is prone to collapse accidents! There are several cases in which the foundation is unqualified: 1. The thickness of the foundation is not up to standard. This kind of foundation often has the possibility of collapse after several times of installation! 2. The thickness of the foundation is up to standard and the strength is unqualified. This kind of foundation will have the risk of collapse in long-term use, which may be several months later, or possibly several years later! Therefore, when we open the store, we must focus on lifting the foundation problem! The anchor screw is also inspected and tightened in 3 months! Safety is the top, you must know that any equipment needs to be maintained!

Unqualified vehicle collapsed

Second, the daily use did not pay attention to the details: For the old auto repair master, the daily use of the lift should pay attention to what problems, may be very clear, but for the auto repair brothers who just entered the need to learn a lot. The attention to detail of the use is also divided into several situations: the use details of the double column: 1. In the process of using the double column, pay special attention to the closing and closing of the lifting arm safety tooth. The double column lifting safety tooth must be in the closed state of the insurance state! Otherwise there is a risk of slipping and causing a rollover! 2, under the insurance state can enter the car work! 3. Position the lifting arm top plate as far as possible in the center position to avoid side slip! 4. The height of the top plate of the four lifting arms is basically the same, and it cannot be uneven. Scissor use details: 1, pay attention to observe whether the lifting platform is consistent! After a long time, there may be a phenomenon of unevenness, and at this time, the leveling of the equipment is required. 2. Whether the insurance is normally opened and closed, the safety tooth must be in the closed state before the vehicle bottom operation can be carried out! 3, the pads must be placed in the normal position, the best cards at the center, and the need to select the appropriate height of pads under the circumstances! Note that the center of gravity of the vehicle. Details poster: 1, insurance are the same, whether the insurance locking sound the same, if different sound, then it needs to be leveled up! 2, must be in the insurance state before entering the car work!

Unadjusted balance system maintenance

Third, the equipment is not maintained: the lifting equipment has not been maintained for a long time! The equipment is seriously damaged, and it can be used safely without any damage to the equipment. It is easy to cause a safety accident! For example, the double-column and four-column steel wire ropes have not been buttered for a long time, and the wear is serious, and there is a risk of breakage. The position of the slider position has not been buttered for a long time, and the slider is seriously damaged! The shearing position of the scissor lift has not been buttered for a long time. The copper sleeve and the slider are seriously worn, the gap becomes large, the equipment is easy to shake and unstable, and it is easy to cause side slip! If the lift has not been replaced with hydraulic oil for a long time, it will sometimes seriously affect the use! Even cause accidents, lift manufacturer provides hydraulic oil must be replaced once a year, maybe aftermarket friend did not do as required, but in this case several hydraulic oil must be replaced to consider: 1, obviously unstable lifting off of. 2. Lifting powerless. 3. The color of the hydraulic oil turns black and dirty. 4, can not lift, the oil is too dirty to block the oil passage.

Pay attention to the maintenance of the equipment

Fourth, the purchase of inferior lifts: in the early stage of the venture we may be very difficult, the funds will be very limited, but we can consider other aspects to save a small amount of money, lifts buy good quality, regular manufacturers produce, there are For related certified products, it is best to purchase products with export qualifications. The quality of the inferior lift is not guaranteed, it is very easy to go wrong, and there are still hidden dangers! For example, why is the low-end lift cheap, because its structure is simple, the steel structure is thin, and the weight is light, and the design of safety protection is not considered! One of the low-end inferior lifts is low in cost and cheap. Quality and safety are left behind, so we can save money when we open an auto repair shop. The money to buy a lift can't be saved. Auto repair friends after reading this article, please pay attention to the daily use of the lift, the store must buy a lift from a regular manufacturer.

Our AUSLAND Car lift is focused on quality and safety and hopes to provide you with good products.